Inkscape GoFab Tutorial - Video

Recommended by Go Fab CNC. This is a free program that's very powerful.
Post Reply
User avatar
Dave
Posts: 198
Joined: Fri Jun 29, 2018 4:39 am
Location: Pflugerville, TX
Contact:
Inkscape GoFab Tutorial - Video

Post by Dave » Mon Oct 01, 2018 10:56 pm

I made an overview video of how I use Inkscape, start to finish. It's on youtube here:

https://www.youtube.com/watch?v=tjAEUaYy6IU

Hope it helps!

BristolFab
Posts: 6
Joined: Tue Jul 03, 2018 8:13 pm
Re: Inkscape GoFab Tutorial

Post by BristolFab » Tue Nov 06, 2018 4:43 pm

Hi Dave (or anyone that can help me), I saw your video and have been doing things a little differently. I tried to use the cut styles on the gofab app but something isn't right. I attached a picture of what I get when I use any of the cut style tools and this happens to every design I have. All I really need is to change the cut order so it cuts in the right order. Any pointers will be highly appreciated!!
Help!
Help!

User avatar
Dave
Posts: 198
Joined: Fri Jun 29, 2018 4:39 am
Location: Pflugerville, TX
Contact:
Re: Inkscape GoFab Tutorial

Post by Dave » Tue Nov 06, 2018 7:57 pm

Make sure you're using the latest tablet software. You can get the update here:

http://gofabcnc.com/updates/

If that doesn't fix it, send me the gcode file and I can figure out why it isn't working.

BristolFab
Posts: 6
Joined: Tue Jul 03, 2018 8:13 pm
Re: Inkscape GoFab Tutorial

Post by BristolFab » Tue Nov 06, 2018 10:02 pm

https://drive.google.com/file/d/160PzMP ... sp=sharing


Here is the cut file. Sam walked me thru the update a couple months ago I should be up updated. Thank you so much for your help!

BristolFab
Posts: 6
Joined: Tue Jul 03, 2018 8:13 pm
Re: Inkscape GoFab Tutorial

Post by BristolFab » Wed Nov 07, 2018 12:03 am

Ahh, I do see a tablet update from a couple weeks ago i must have missed. I will see if that will fix the problem.

Midwestcoastfab
Posts: 109
Joined: Mon Jul 30, 2018 1:20 am
Re: Inkscape GoFab Tutorial

Post by Midwestcoastfab » Wed Nov 28, 2018 3:14 pm

Dave. Every time something goes wrong you answer my question in this video. Thank you so much for this


Post Reply