AutoCad, Sheetcam, Inkscape to GoFabCNC

Show pictures of projects you've done.
Post Reply
irontexasfab
Posts: 45
Joined: Sat Aug 04, 2018 3:31 am
AutoCad, Sheetcam, Inkscape to GoFabCNC

Post by irontexasfab » Mon Sep 03, 2018 4:52 am

Here is something I had to do for Hank Jr's nephew tonite. From Image concept to AutoCad, Inkscape and into Sheetcam
then upload to the machine.
Attachments
mwskullac.PNG

irontexasfab
Posts: 45
Joined: Sat Aug 04, 2018 3:31 am
Re: AutoCad, Sheetcam, Inkscape to GoFabCNC

Post by irontexasfab » Mon Sep 03, 2018 4:56 am

more of the files photos
Attachments
mwskullink.PNG

irontexasfab
Posts: 45
Joined: Sat Aug 04, 2018 3:31 am
Re: AutoCad, Sheetcam, Inkscape to GoFabCNC

Post by irontexasfab » Mon Sep 03, 2018 4:57 am

More , I cant get more than one file to attach
Attachments
mwslullsc.PNG

irontexasfab
Posts: 45
Joined: Sat Aug 04, 2018 3:31 am
Re: AutoCad, Sheetcam, Inkscape to GoFabCNC

Post by irontexasfab » Mon Sep 03, 2018 4:59 am

Finished product
Attachments
IMG_3082.JPG

User avatar
Dave
Posts: 198
Joined: Fri Jun 29, 2018 4:39 am
Location: Pflugerville, TX
Contact:
Re: AutoCad, Sheetcam, Inkscape to GoFabCNC

Post by Dave » Mon Sep 03, 2018 5:48 pm

That's pretty slick. The spade came out really cool, that thin spot on stem looks tricky. Did the spade end up being a loose piece? Was that intentional?


Post Reply