First 1" plate cut MINTYYY

Show pictures of projects you've done.
Post Reply
chademling94
Posts: 148
Joined: Sun Aug 19, 2018 6:57 pm
Location: Wisconsin
First 1" plate cut MINTYYY

Post by chademling94 » Thu Apr 16, 2020 12:11 am

70 amps, feed-150, ignite- 110, plunge-90, cut-105, delay 1500 and 75 psi with a 1.2 tip. EDGE START ONLY!! Got some dross on the bottom but the cut is almost perfect and no kerf
Attachments
1 inch plate first cut.jpg
KROOKED IRON FAB & STEEL
CHAD EMLING
Millermatic 252
Synchrowave 210
Thermal Dynamics Cutmaster 52
Grizzly G0757Z H/V Mill
Grizzly G0765 Lathe
Ellis 1600
Everlast 80s
GoFab CNC 4'x8' Plasma Table

Dave56
Posts: 45
Joined: Wed Sep 25, 2019 3:45 am
Location: Central Illinois
Re: First 1" plate cut MINTYYY

Post by Dave56 » Thu Apr 30, 2020 7:12 pm

WOW ! Good to know..I take it was cut with the new software? Im getting ready to cut some 1 inch for a guy mini Pulling Tractor Weights. So Ill have to try it out. but your Feed Rate was 150?? That sounded kinda fast..Let me know... Thanks for Post.

chademling94
Posts: 148
Joined: Sun Aug 19, 2018 6:57 pm
Location: Wisconsin
Re: First 1" plate cut MINTYYY

Post by chademling94 » Thu Apr 30, 2020 10:03 pm

This is with the old software so that 150 feed is actually mmpm, convert to ipm (divided by 25.4) it would be just under 6 ipm.
KROOKED IRON FAB & STEEL
CHAD EMLING
Millermatic 252
Synchrowave 210
Thermal Dynamics Cutmaster 52
Grizzly G0757Z H/V Mill
Grizzly G0765 Lathe
Ellis 1600
Everlast 80s
GoFab CNC 4'x8' Plasma Table


Post Reply