Welcome to our new Forum!

Say hello and introduce yourself!
Post Reply
Ryan Lindsey
Posts: 61
Joined: Thu Jun 28, 2018 4:21 am
Welcome to our new Forum!

Post by Ryan Lindsey » Thu Jun 28, 2018 6:15 am

This forum has been a long time coming!

I hope this will be a great resource for everyone with a Go Fab CNC Plasma Table. Sam and I will be on here as much as possible to help in any way we can.

If you have any suggestions for the forum, please PM me and let me know.

Thanks!

Sam Lindsey
Posts: 11
Joined: Thu Jun 28, 2018 1:23 pm
Re: Welcome to our new Forum!

Post by Sam Lindsey » Thu Jun 28, 2018 1:34 pm

Hey everyone,

Thanks for joining our forum! I look forward to seeing what people are making and having more insight into what’s happening with our machines.

Feel free to pm me if you have any issues or suggestions.

Thanks

irontexasfab
Posts: 45
Joined: Sat Aug 04, 2018 3:31 am
Re: Welcome to our new Forum!

Post by irontexasfab » Sat Aug 04, 2018 3:35 am

Hello,

First time here made my first cut with my new machine tonight!

Midwestcoastfab
Posts: 109
Joined: Mon Jul 30, 2018 1:20 am
Re: Welcome to our new Forum!

Post by Midwestcoastfab » Sun Aug 05, 2018 3:52 am

Let’s see what you did

rjk4240
Posts: 17
Joined: Sun Sep 09, 2018 10:28 pm
Location: Hallsville TX
Re: Welcome to our new Forum!

Post by rjk4240 » Sat Oct 06, 2018 1:16 pm

thanks Ryan good work. thanks for all the help Still having trouble with the DXF file. Will be reaching out.

rjk4240
Posts: 17
Joined: Sun Sep 09, 2018 10:28 pm
Location: Hallsville TX
Re: Welcome to our new Forum!

Post by rjk4240 » Tue Feb 19, 2019 1:27 pm

Ryan any thoughts on updating the software to operate with DXF Files ? and I see you have updated software posted 7 OCT 2018. We picked up our table on the 4 OCT. so is my software up to date ?

Thanks Rich Kienzle
915-727-2649

Ryan Lindsey
Posts: 61
Joined: Thu Jun 28, 2018 4:21 am
Re: Welcome to our new Forum!

Post by Ryan Lindsey » Tue Feb 19, 2019 2:56 pm

Hey Richard,

We are looking in to adding support for DXF files directly, but it’ll be a little while before we have a solution.

I thought we did an Update on your software, but I’m not positive. Feel free to download both the Tablet and Table Updates though. Uninstall the Go Fab CNC app before trying to install the Update on the Tablet. Then, use the Go Fab CNC app to Update the Table using the Table Update file. To get to it, press the little white Gear icon at the bottom left of the Screen, then select Machine Settings, then press Update Table. That’ll open a screen that’ll let you select the Table Update file. After that, just follow the directions on the screen.


Post Reply