Accelerated Version 4.79 and UP Problems

Newest Version of the Go Fab CNC Accelerated Software

Post any Issues or Requests related to the Accelerated Software here.
chademling94
Posts: 143
Joined: Sun Aug 19, 2018 6:57 pm
Location: Wisconsin
Re: Accelerated Version 4.79 and UP Problems

Post by chademling94 » Wed Jan 27, 2021 3:55 pm

Tried the newest 4.80 again last night and had the same issue. I am still running the original IPRODA tablet that I got with the table 2 years ago, could that possibly be the issue? I restarted it and made sure everything on is up to date as well and no changes.
KROOKED IRON FAB & STEEL
CHAD EMLING
Millermatic 252
Synchrowave 210
Thermal Dynamics Cutmaster 52
Grizzly G0757Z H/V Mill
Grizzly G0765 Lathe
Ellis 1600
Everlast 80s
GoFab CNC 4'x8' Plasma Table

Dfoster84
Posts: 3
Joined: Fri Mar 27, 2020 9:53 pm
Location: Klingerstown, PA
Re: Accelerated Version 4.79 and UP Problems

Post by Dfoster84 » Thu Jan 28, 2021 7:26 pm

Updated to .81 today. Tried a dry run and the tip drags. Tried to cut a file and the tip drags. Tried to go back to .78 to get my files cut today and it is showing as a corrupt file??

elopez
Posts: 5
Joined: Fri Jan 03, 2020 5:29 pm
Re: Accelerated Version 4.79 and UP Problems

Post by elopez » Sun Jan 31, 2021 2:24 am

chademling94 wrote:
Tue Jan 26, 2021 12:15 am
Files are sent
Are you still having issues opening the files after current update, because I just opened the files on my tablet without any issues?

Cody
Posts: 27
Joined: Sat Dec 21, 2019 1:35 am
Re: Accelerated Version 4.79 and UP Problems

Post by Cody » Sun Jan 31, 2021 11:51 pm

Just updated my tablet to 4.81 and attempted to use my table today.

Problems:
The "get thc value" on cut settings doesn't save anything when you use it.

My torch is diving/dragging EVERYWHERE now like thc isn't working at all.

App crashes when i try to verify ignite or plunge height.

My files keep saying "could not find pierce point. Try to use z axis?" and does nothing when you select yes, but I know it's not the files because I have 4.78 on my phone just to check the files before I send them to my tablet to cut and they open fine on 4.78.

When I load a file into the app, auto parts discovery is already on. However, when I go to turn it off my files disappear sometimes and only show back up when I turn auto parts discovery back on.

Update:
My phone will open my files perfectly using 4.78 so I decided to revert my tablet back to 4.78 also. After reverting my tablet to 4.78 it still says "could not find pierce points. Try to use z axis?"

Update: I went to the app store and downloaded the app which is 4.80 instead of 4.81 from the website and my tablet is opening all my files normally again. I haven't tried cutting again yet to check the other problems.
Last edited by Cody on Tue Feb 02, 2021 4:43 pm, edited 1 time in total.

chademling94
Posts: 143
Joined: Sun Aug 19, 2018 6:57 pm
Location: Wisconsin
Re: Accelerated Version 4.79 and UP Problems

Post by chademling94 » Mon Feb 01, 2021 3:12 pm

elopez wrote:
Sun Jan 31, 2021 2:24 am
chademling94 wrote:
Tue Jan 26, 2021 12:15 am
Files are sent
Are you still having issues opening the files after current update, because I just opened the files on my tablet without any issues?
Yes, with the old IPRODA tablet. I tried it on a new tablet and it would work then so the issue is definitely with my older tablet on my end.
KROOKED IRON FAB & STEEL
CHAD EMLING
Millermatic 252
Synchrowave 210
Thermal Dynamics Cutmaster 52
Grizzly G0757Z H/V Mill
Grizzly G0765 Lathe
Ellis 1600
Everlast 80s
GoFab CNC 4'x8' Plasma Table

elopez
Posts: 5
Joined: Fri Jan 03, 2020 5:29 pm
Re: Accelerated Version 4.79 and UP Problems

Post by elopez » Tue Feb 02, 2021 3:09 pm

chademling94 wrote:
Mon Feb 01, 2021 3:12 pm
elopez wrote:
Sun Jan 31, 2021 2:24 am
chademling94 wrote:
Tue Jan 26, 2021 12:15 am
Files are sent
Are you still having issues opening the files after current update, because I just opened the files on my tablet without any issues?
Yes, with the old IPRODA tablet. I tried it on a new tablet and it would work then so the issue is definitely with my older tablet on my end.
Which version of Android do you have installed on the tablet?

chademling94
Posts: 143
Joined: Sun Aug 19, 2018 6:57 pm
Location: Wisconsin
Re: Accelerated Version 4.79 and UP Problems

Post by chademling94 » Tue Feb 02, 2021 3:14 pm

elopez wrote:
Tue Feb 02, 2021 3:09 pm
chademling94 wrote:
Mon Feb 01, 2021 3:12 pm
elopez wrote:
Sun Jan 31, 2021 2:24 am


Are you still having issues opening the files after current update, because I just opened the files on my tablet without any issues?
Yes, with the old IPRODA tablet. I tried it on a new tablet and it would work then so the issue is definitely with my older tablet on my end.
Which version of Android do you have installed on the tablet?
Android Version 6.0 (newest one available on this tablet) and model T1045HPN if that helps any.
KROOKED IRON FAB & STEEL
CHAD EMLING
Millermatic 252
Synchrowave 210
Thermal Dynamics Cutmaster 52
Grizzly G0757Z H/V Mill
Grizzly G0765 Lathe
Ellis 1600
Everlast 80s
GoFab CNC 4'x8' Plasma Table

elopez
Posts: 5
Joined: Fri Jan 03, 2020 5:29 pm
Re: Accelerated Version 4.79 and UP Problems

Post by elopez » Tue Feb 02, 2021 4:53 pm

chademling94 wrote:
Mon Feb 01, 2021 3:12 pm
Android Version 6.0 (newest one available on this tablet) and model T1045HPN if that helps any.
Do you have the files directly on your tablet, or are you opening them from google drive?

Cody
Posts: 27
Joined: Sat Dec 21, 2019 1:35 am
Re: Accelerated Version 4.79 and UP Problems

Post by Cody » Tue Feb 02, 2021 4:56 pm

Are y'all just monitoring this problem or have y'all looked into the 5 other people posting problems with 4.79+ on here?

Go Fab CNC
Site Admin
Posts: 55
Joined: Fri Jun 22, 2018 1:03 pm
Re: Accelerated Version 4.79 and UP Problems

Post by Go Fab CNC » Tue Feb 02, 2021 5:28 pm

Cody wrote:
Tue Feb 02, 2021 4:56 pm
Are y'all just monitoring this problem or have y'all looked into the 5 other people posting problems with 4.79+ on here?
We’re looking in to any and all problems and fixing them as we go.

We’ve Released:
4.79
4.80
4.81

And intend to Release 4.82 today.


Post Reply