Accelerated Version 4.79 and UP Problems

Newest Version of the Go Fab CNC Accelerated Software

Post any Issues or Requests related to the Accelerated Software here.
Go Fab CNC
Site Admin
Posts: 55
Joined: Fri Jun 22, 2018 1:03 pm
Accelerated Version 4.79 and UP Problems

Post by Go Fab CNC » Mon Jan 18, 2021 3:25 am

This is the place to post any issues you're experiencing with the newest release of the Go Fab CNC Accelerated Software Version 4.79.

We are actively monitoring this Forum and will roll out necessary changes ASAP.

Yarbermarine& fab
Posts: 4
Joined: Thu May 21, 2020 12:51 am
Re: Accelerated Version 4.79 and UP Problems

Post by Yarbermarine& fab » Tue Jan 19, 2021 7:03 pm

Unable to communicate with table

Randy
Posts: 283
Joined: Thu Jan 24, 2019 1:52 am
Location: OHIO
Re: Accelerated Version 4.79 and UP Problems

Post by Randy » Wed Jan 20, 2021 12:46 am

Keep your plasmas off well you update lol it will fire when updating table and then fire again when Finishing. Another is when you first load up you can't change size till you change out size of metal then you can change size. Other than that she is moving well no drag yet so that's good 👌

Colyevo
Posts: 1
Joined: Thu May 07, 2020 7:12 pm
Re: Accelerated Version 4.79 and UP Problems

Post by Colyevo » Sat Jan 23, 2021 12:32 am

THC still not working correctly, tips are new, good ground, but torch keeps raising after a couple of inches of cut! This has been an issue with all versions of software on my table!

It has also sporadically deleted a couple of separate files sent to table, after toggling with the settings a couple of times, when returning to cut, the file will be have disappeared!

andrewt87
Posts: 1
Joined: Wed Oct 14, 2020 2:11 pm
Re: Accelerated Version 4.79 and UP Problems

Post by andrewt87 » Sat Jan 23, 2021 10:07 pm

Every time I try to verify my ignite or plunge height my app app crashes. Getting a constant pop up telling me to confirm my torch is installed correctly.

chademling94
Posts: 143
Joined: Sun Aug 19, 2018 6:57 pm
Location: Wisconsin
Re: Accelerated Version 4.79 and UP Problems

Post by chademling94 » Sun Jan 24, 2021 4:03 am

Just tried the new 4.79 software. Updated fine and table moves around fine (ALOT FASTER) but when I try to bring in a file nothing shows up? It shows the amount of pierces and cut time but doesnt show the drawing on the screen, just says "tap to load file". I know they are good files, I have used them before the update and again after reverting to the old software just to make sure nothing weird happened.
KROOKED IRON FAB & STEEL
CHAD EMLING
Millermatic 252
Synchrowave 210
Thermal Dynamics Cutmaster 52
Grizzly G0757Z H/V Mill
Grizzly G0765 Lathe
Ellis 1600
Everlast 80s
GoFab CNC 4'x8' Plasma Table

elopez
Posts: 5
Joined: Fri Jan 03, 2020 5:29 pm
Re: Accelerated Version 4.79 and UP Problems

Post by elopez » Sun Jan 24, 2021 3:18 pm

chademling94 wrote:
Sun Jan 24, 2021 4:03 am
Just tried the new 4.79 software. Updated fine and table moves around fine (ALOT FASTER) but when I try to bring in a file nothing shows up? It shows the amount of pierces and cut time but doesnt show the drawing on the screen, just says "tap to load file". I know they are good files, I have used them before the update and again after reverting to the old software just to make sure nothing weird happened.
Could you email me the file you're having issues with? eduardo@gofabcnc.com

chademling94
Posts: 143
Joined: Sun Aug 19, 2018 6:57 pm
Location: Wisconsin
Re: Accelerated Version 4.79 and UP Problems

Post by chademling94 » Sun Jan 24, 2021 5:18 pm

I'm out of the shop today but will right away tomorrow, the file isn't the issue, I've used them multiple times on the old software with no issues but I'll send it anyway just to make sure
KROOKED IRON FAB & STEEL
CHAD EMLING
Millermatic 252
Synchrowave 210
Thermal Dynamics Cutmaster 52
Grizzly G0757Z H/V Mill
Grizzly G0765 Lathe
Ellis 1600
Everlast 80s
GoFab CNC 4'x8' Plasma Table

elopez
Posts: 5
Joined: Fri Jan 03, 2020 5:29 pm
Re: Accelerated Version 4.79 and UP Problems

Post by elopez » Sun Jan 24, 2021 7:53 pm

chademling94 wrote:
Sun Jan 24, 2021 5:18 pm
I'm out of the shop today but will right away tomorrow, the file isn't the issue, I've used them multiple times on the old software with no issues but I'll send it anyway just to make sure
I'm sure the file isn't the issue, but it will allow me to see what part of the code in the app is crashing while opening the file

chademling94
Posts: 143
Joined: Sun Aug 19, 2018 6:57 pm
Location: Wisconsin
Re: Accelerated Version 4.79 and UP Problems

Post by chademling94 » Tue Jan 26, 2021 12:15 am

Files are sent
KROOKED IRON FAB & STEEL
CHAD EMLING
Millermatic 252
Synchrowave 210
Thermal Dynamics Cutmaster 52
Grizzly G0757Z H/V Mill
Grizzly G0765 Lathe
Ellis 1600
Everlast 80s
GoFab CNC 4'x8' Plasma Table


Post Reply