Water Pans?

Diamondback
Posts: 50
Joined: Fri Jul 06, 2018 12:35 pm
Location: Confederate States of America
Contact:
Re: Water Pans?

Post by Diamondback » Sat Dec 08, 2018 1:08 am

Leak tested...
Attachments
20181127_174255.jpg

Diamondback
Posts: 50
Joined: Fri Jul 06, 2018 12:35 pm
Location: Confederate States of America
Contact:
Re: Water Pans?

Post by Diamondback » Sat Dec 08, 2018 1:09 am

Installed...
Attachments
20181201_124758.jpg

Diamondback
Posts: 50
Joined: Fri Jul 06, 2018 12:35 pm
Location: Confederate States of America
Contact:
Re: Water Pans?

Post by Diamondback » Sat Dec 08, 2018 1:11 am

Circulation system (Big thanks to Dave!)...

Below is a repost of Dave's solution for fluid circulation.
https://drive.google.com/file/d/1nzgKAs ... 3uSwc/view
Attachments
20181201_142355.jpg
20181201_142344.jpg
20181201_142049.jpg
Last edited by Diamondback on Sat Dec 08, 2018 1:31 am, edited 1 time in total.

Diamondback
Posts: 50
Joined: Fri Jul 06, 2018 12:35 pm
Location: Confederate States of America
Contact:
Re: Water Pans?

Post by Diamondback » Sat Dec 08, 2018 1:12 am

Filled up with 230 gallons and ready to cut...

Table solution (per 75 gallons)
1/4lb Sodium Nitrite
1 Teaspoon Physan 20
1oz. Green Food Dye
Attachments
20181202_162759.jpg

Diamondback
Posts: 50
Joined: Fri Jul 06, 2018 12:35 pm
Location: Confederate States of America
Contact:
Re: Water Pans?

Post by Diamondback » Sat Dec 08, 2018 1:26 am


contractcreativity
Posts: 27
Joined: Wed Oct 24, 2018 1:06 am
Re: Water Pans?

Post by contractcreativity » Mon Dec 10, 2018 1:38 pm

What does everyone do to retrieve smaller parts that fall through the slats?

User avatar
Dave
Posts: 198
Joined: Fri Jun 29, 2018 4:39 am
Location: Pflugerville, TX
Contact:
Re: Water Pans?

Post by Dave » Mon Dec 10, 2018 5:54 pm

I go magnet fishing. With a high power flashlight.

rdwesley
Posts: 69
Joined: Mon Jul 09, 2018 11:42 pm
Re: Water Pans?

Post by rdwesley » Tue Dec 18, 2018 11:11 pm

Where did you get your formula for the water? Does it work as well as the GreenCut fluid?

Diamondback
Posts: 50
Joined: Fri Jul 06, 2018 12:35 pm
Location: Confederate States of America
Contact:
Re: Water Pans?

Post by Diamondback » Wed Dec 19, 2018 12:20 am

I got the recipe from this PlasmaSpider.com thread https://www.plasmaspider.com/viewtopic.php?t=572
So far so good, no dust or smoke in the shop, no rust on my parts, couldn't ask for more. :D

User avatar
Dave
Posts: 198
Joined: Fri Jun 29, 2018 4:39 am
Location: Pflugerville, TX
Contact:
Re: Water Pans?

Post by Dave » Wed Dec 19, 2018 2:11 am

I'm sure the homebrew stuff is fine. I strongly considered going with the homebrew version, but since I work out of an attached garage and have small kids, I wanted to be able to show Tamara the safety data sheet :lol:


Post Reply