Page 1 of 1
SheetCam Tool Parameters
Posted: Tue Apr 09, 2019 6:10 pm
by jeffz1
If I set up all of my parameters in sheetcam (feedrate, Pierce Height, ect) is that what I am cutting at or does the GoFab software change this to the GoFab preset settings for the thickness of material that I am cutting?
Re: SheetCam Tool Parameters
Posted: Tue Apr 09, 2019 8:05 pm
by Dave
GoFab changes that based on the metal you pick. Any Z values or feedrate values in the gcode are scrubbed out before it goes to the table.
Re: SheetCam Tool Parameters
Posted: Fri Sep 06, 2019 4:07 am
by GregSmith
What about lead-ins or pierce points? Do those get taken out by gofab software too?
I get a no pierce points error in go fab app when using sheetcam posts too...
Re: SheetCam Tool Parameters
Posted: Sat Feb 01, 2020 2:33 am
by Dave56
WHO HAS FIGURED OUT HOW TO USE SHEETCAM WITH GOFAB TABLES?? WANTING TO USE MY SHEETCAM..JUST DONT KNOW HOW TO SET IT UP..THANKS
Re: SheetCam Tool Parameters
Posted: Sun Feb 02, 2020 6:51 am
by tkton123
Dave56 wrote: ↑Sat Feb 01, 2020 2:33 am
WHO HAS FIGURED OUT HOW TO USE SHEETCAM WITH GOFAB TABLES?? WANTING TO USE MY SHEETCAM..JUST DONT KNOW HOW TO SET IT UP..THANKS
I have used it since the beginning, since it allows me to select the pierce points were i want.
just select the Generic Plasma With Optional scriber Post procesor.
Re: SheetCam Tool Parameters
Posted: Tue Feb 04, 2020 10:46 pm
by Dave56
tkton123 wrote: ↑Sun Feb 02, 2020 6:51 am
Dave56 wrote: ↑Sat Feb 01, 2020 2:33 am
WHO HAS FIGURED OUT HOW TO USE SHEETCAM WITH GOFAB TABLES?? WANTING TO USE MY SHEETCAM..JUST DONT KNOW HOW TO SET IT UP..THANKS
I have used it since the beginning, since it allows me to select the pierce points were i want.
just select the Generic Plasma With Optional scriber Post procesor.
Hey Thanks for reply.. I just got email back from Les @ Sheetcam.and he made me a Post Process.Seem to work good..If anyone wants it .It wont let me post here for some reason..its a Gofab plasma.scpost .. Email me if anyone needs it.Its made for our tables. What I would be interested in, is the setting for tools.. We do feedrate.and sheetcam has IPM. Can I get your setting for some metals please. I dont know what you have, I cut 14,16,11,gauge,and getting ready to cut some 5/16th..If you have any that would be awesome...I also have email.if you want to send any there...dishtech43@yahoo.com....