Rounded slots from sheetcam squared off in GoFabCNC App

Another great program for creating designs specifically for CNC machines.
Post Reply
gsmith
Posts: 10
Joined: Sat Sep 08, 2018 8:35 am
Rounded slots from sheetcam squared off in GoFabCNC App

Post by gsmith » Tue Sep 25, 2018 8:35 am

Okay, so I used Fusion360 as my primary CAD program. I converted my CAD drawing into a dxf then used Sheetcam to produce the gcode. I have no idea why this simple part is giving me so much trouble in the gofabcnc app. Its the same ole, rectangle with three rounded end slots. The GoFab app squares off slots, I have no idea why. Anyone know how to fix this? Here's the files in my dropbox.

Thank you anyone...


https://www.dropbox.com/sh/pidipjqjgnqy ... _Ntta?dl=0

tkton
Posts: 6
Joined: Sat Jul 14, 2018 8:32 pm
Re: Rounded slots from sheetcam squared off in GoFabCNC App

Post by tkton » Wed Sep 26, 2018 5:02 pm

Hi, Check this link, i think you must update your tablet and table it worked for me.

http://gofabcnc.com/updates/

Ryan Lindsey
Posts: 61
Joined: Thu Jun 28, 2018 4:21 am
Re: Rounded slots from sheetcam squared off in GoFabCNC App

Post by Ryan Lindsey » Wed Sep 26, 2018 6:26 pm

Excellent suggestion Juan! Thanks for posting the link.

The newest version of the Tablet and Table software has several new features and improvements including displaying Arcs/Circles correctly.

Please note, the previous version still cuts Arcs and Circles correctly, they just don’t show as Arcs and Circles on the Tablet.

GregSmith
Posts: 53
Joined: Wed Sep 12, 2018 2:44 am
Re: Rounded slots from sheetcam squared off in GoFabCNC App

Post by GregSmith » Thu Sep 27, 2018 2:32 am

Thanks. That sounds promising, I’ll go to the update page and update the table and the tablet. How do we know when new updates are out? Just keep checking the forum? Or is there a E mail that gets sent out.


Post Reply